The Memco elite 648 infra-red detector system is designed for new and existing installations where the detectors are fitted on car-mounted brackets. The assembly is extremely rigid because of the increased strength offered by the 13.5mm profile. Coupled with this, a more versatile installation bracket allows simple, varied height adjustments when fitting.

In this "static installation" a criss-cross curtain of 81 infra-red beams is generated. The detector cables are not subjected to movement and the detectors are protected from vandalism.

The detectors can also be mounted on the car doors and will adjust automatically to optimise detection performance. When the doors open the beam pattern changes from 50 beams to 81 beams at typically 650mm. When the door separation is below 250mm then the beam pattern reduces to 18 beams.

• Robust 13.5mm wide profile - for increased rigidity
• Easy to install
• 81 criss-cross beams offer protection up to a height of 1.8m as required by EN81-70:2003
• Low power consumption
• Microcontroller based TX and RX (optional power supply box)
• NPN and PNP output versions available
• Diagnostic LEDs and timeout software
• 4m range