The Standard detectors are designed to fit on the side of the door flush with the door edge. They are fixed using selftapping screws, through height-adjustable brackets and covered by a vandal-resistant finger guard.

These detectors are particularly suitable for centre-opening doors with a wide running clearance where the detector also doubles as a sightguard. The cable may be routed from the top of the detector or down inside the housingand out the middle of the back.

• "3D" zone to give extended protection into the landing
• 40 parallel or 194 criss-cross beams offer protection up to a height of 1.8m
• Selectable modes of 3D operation to suit various installation sites
• Advanced 3D diagnostic self-check
• Standard and Slimline profiles available
• Greatly reduces the chances of passenger injury by the landing door
• Damage to landing doors from trolleys and hospital beds is essentiallyeliminated
• No increase in installation time compared with conventional infra-red detection systems
• Patented 3D and Power Reduction Features